Новости, поляки решили переделать "коробочку" под то о чем многие мечтали
)
теперь экран будет на 3"
коробочку увеличили в размерах и добавили возможность подключения дополнительных аналоговых датчиков
Main differences between UTCOMP-3 and UTCOMP 2.5:
new module is compatible also with 24V installation,
less current consumption (energy saving),
LCD contrast adjust on the buttons,
pinout compatible with 2.5 version,
display compatible with 2.5 version,
more possibilities of input configuration, e.g. there is possibility to use additional resistance/NTC sensor (with power supply from UTCOMP) and connect to factory one as well (buffered input),
possibility to assign temperatures to sensors, e.g. engine/oil temperature can be measured from digital or analog sensors,
additional pressure measurement (e.g. there is possibility to measure boost pressure and oil pressure at the same time),
additional alerts (all temperatures, voltage, turbo pressure, oil pressure, AFR, EGT, fuel level, speed limit),
analog inputs can be labeled on oscilloscope.
Main differences between UTCOMP-PRO and UTCOMP-3:
bigger OLED display with higher resolution available in 4 colours,
5 more analog inputs (total 7),
2 more digital temperature sensors DS18B20 (total 4)
additional digital input (e.g. for RPM),
additional digital output (e.g. relay control 5V/100mA) - reserved for future use,
additional external FLASH memory (user can change OLED graphics, in near future data-logger),
new 16-pin display connector (longer tape possible),
3 additional configurable user screens with new templates (total 4 user screens).
~80 EUR for UTCOMP-3 LCD 2,5",
~110 EUR for UTCOMP-3 OLED 2,3",
~160 EUR for UTCOMP-PRO (OLED 3,2")
Prices may slighty change due to exchange rate.
UTCOMP 2.5 will be still in the offer (~65 EUR).
http://www.reveltronics.com/forum/vi...c.php?f=21&t=9
Добавлено через 55 секунд
В часы с таким экраном оно конечно с большим запилом только влезет